Home / Products / Brushless Mini Electric winch / BL170 MINI BRUSHLESS ELECTRIC WINCH
  • BL170 MINI BRUSHLESS ELECTRIC WINCH
  • BL170 MINI BRUSHLESS ELECTRIC WINCH
  • BL170 MINI BRUSHLESS ELECTRIC WINCH
  • BL170 MINI BRUSHLESS ELECTRIC WINCH

BL170 MINI BRUSHLESS ELECTRIC WINCH

Suitable for hanging and lifting the structure,curtain-wall glass,advertising board and other materials for storage or freight transpor-tation. It has the advantages of compact structure,high efficien-cy,light weight and easy to use power supply, and also cost saving.with Wire and Wireless Remote Control, for Garage, Warehouse, Factory Lifting Towing

Motor Type Brushless
Net Weight 17kg
Lifting Capacity 500kg
Rope/Cable Length 17m
Operating Voltage 220V

  • Product description
Product description

APPLICATION
Hoisting and moving structural members, curtain-wall glass, advertising boards and comparable materials for storage or freight transportation is the job this winch was designed around. The structure is compact, the weight is low, and the power supply is simple to connect, so working efficiency runs high while cost is kept down.

SPECIAL FEATURES
Motor system
Power comes from an industrial-grade permanent magnet brushless maglev motor, a design that withstands hard use and rarely fails. Two single-phase voltages are offered, 110V and 220V, so a single machine family covers both site standards. Because output and efficiency are both high, long-hour duty is normal rather than exceptional. Temperature protection and overload protection are fitted, stepless speed regulation is standard, and the enameled wire is rated for 200 ℃, which puts working capacity 50% above the ED series.

Electric control system
The circuit carries no capacitor at all; an SCM governs it. Running is stable and the power factor high, while plug-and-pull wiring is what makes operation and maintenance convenient and reliable.

Brake system
Two principles brake the drum together: a mechanical ratchet, and resistive short-circuit control. Sintered brake elements carry a high friction coefficient, an arrangement that keeps the motor durable over long service. Lose power, or hit a winch fault, and braking is immediate, which is why safety stays high and service life long.

Safety system
Should the hook climb to the set lifting height, or should the wire rope run in reverse, a limit switch trips, protects the machine and stops it from working.

Wire rope specifications
Wire rope is supplied from a top imported brand, and its safety factor is four times that of ordinary machines.

Gear system
Torque reaches the drum through a high-efficiency bevel drive reduction gear. Special heat treatment raises gear strength to three times that of ordinary products.

Main unit housing
Motor and gear box are cast as a single aluminium alloy die-casting, a structure with real toughness. High-precision CNC machining is what makes drum rotation smooth and noise low. Exterior surfaces are powder coated to automotive grade, so appearance holds up, and the footprint stays compact.

Look at other electric hoists
Click to view more
Nantong Powerful Hoist Machinery Co., Ltd.
Need to consult?
Please describe your needs, and I will reply to you as soon as possible.
I agree to the processing of my personal data.*
500kg Mini Brushless Electric Winch BL170 Industry knowledge

The BL170 MINI BRUSHLESS ELECTRIC WINCH manufacturer is the 500 kg entry point in our brushless winch line at GOODIDEA It is built for hanging and lifting structural sections, curtain-wall glass, advertising boards and similar materials during storage or freight movements, and it is compact enough to move between site positions.

We supply the BL170 as a standard unit and as an OEM program for distributors and equipment brands. It uses a brushless permanent-magnet maglev motor, runs on single-phase power, and combines a mechanical ratchet with resistive short-circuit braking, so one compact machine covers most site lifting and towing points.

Application fit

The BL170 is used where a larger crane is impractical and a fixed capacity point is enough. Typical jobs include hoisting curtain-wall glass to the installation level, positioning advertising boards, moving structural members, and loading or unloading storage racks and freight platforms.

  • Garage, warehouse and factory lifting or towing
  • Curtain-wall and facade material handling
  • Advertising board installation and maintenance
  • Storage and freight transportation support

Because the complete winch weighs 17 kg and the motor and gearbox housing is a single aluminium alloy die-casting, the BL170 can be moved between workstations without a dedicated support frame.

BL170 specifications and configuration

The standard BL170 is defined by a 500 kg lifting capacity, a 17 m rope and a 220 V single-phase brushless motor; the same family is also available at 110 V. We use these base values to configure rope length, control type and any OEM documentation.

Parameter BL170 standard value Configuration notes
Lifting capacity 500 kg Nominal single-line capacity on the standard drum
Rope / cable length 17 m Longer lengths can be quoted per project
Operating voltage 220 V standard; 110 V variant available Single-phase brushless motor with no capacitor
Net weight 17 kg Compact aluminium alloy housing
Control Wired and wireless remote control Suited to garage, warehouse and factory duty
Brake system Mechanical ratchet plus resistive short-circuit control Sintered brake elements hold the drum on power loss
Protective devices Overload protection, temperature protection, limit switch Reverse-run and over-travel protection included
Drive train Heat-treated bevel reduction gear CNC-machined drum seat for smooth, low-noise rotation

Brushless drive and control system

The motor is an industrial-grade permanent-magnet brushless maglev design, so there is no brushed commutator wear and the motor tolerates long running hours. Speed is controlled steplessly from the handset, and the control board uses a microcontroller rather than a capacitor circuit.

  • No capacitor in the power circuit; SCM governs operation for stable running and a high power factor.
  • Plug-and-pull wiring keeps installation and service connections fast.
  • Temperature protection and overload protection are fitted as standard.
  • 200 degrees C-rated enameled wire gives 50% higher working capacity than the ED-series motor design.
  • 110 V and 220 V single-phase versions are available for different site standards.

Braking and operating safety

The BL170 stops the drum with two independent principles: a mechanical ratchet and resistive short-circuit control from the brushless motor. Sintered brake elements provide a high friction coefficient, so the brake remains effective for long service.

  • Mechanical ratchet prevents drum reversal when power is removed.
  • Resistive short-circuit braking holds the load immediately on power loss or a winch fault.
  • A limit switch stops operation when the hook reaches the set lifting height or the rope runs in reverse.
  • The wire rope is supplied from a premium imported source and is sized with a safety factor four times that of ordinary machines.
  • The winch is intended for material handling. Personnel lifting must use a properly designed lifting appliance, not a material winch.

Mechanical build and maintenance

Motor and gearbox are cast as a single aluminium alloy housing, and high-precision CNC machining keeps drum alignment smooth and noise low. The bevel reduction gears receive special heat treatment, giving the drive train three times the strength of ordinary gearing.

Exterior surfaces are powder coated to automotive grade, and the compact housing reduces the mounting space needed on racks, columns or temporary structures. Service is simplified by the no-capacitor SCM board and plug-in wiring; brushless motor construction also removes the need for brush replacement.

Position in the brushless winch range

The BL170 is the 500 kg model in our brushless mini electric winch family. For higher working loads, move up to Model.BL260 MINI BRUSHLESS ELECTRIC WINCH or Model.BL340 MINI BRUSHLESS ELECTRIC WINCH. The family shares the same brushless drive and braking architecture, so a distributor can hold one spare-parts logic across adjacent capacities.

More configurations for compact winches are available from the Brushless Mini Electric winch range.

Information we use to configure your BL170

When you request a quotation, include the site voltage, working load, rope length, mounting orientation, lift height and control preference. For OEM programs, also include your target marking, packaging, manual language and estimated annual quantity.

  • Site voltage and frequency: 110 V or 220 V single-phase
  • Rated load and required rope length
  • Mounting arrangement: floor, wall, column or temporary structure
  • Lifting height and required limit-switch positions
  • Control preference: wired, wireless, or both
  • OEM program details: branding, packaging, documentation and target volume

With those facts we prepare the configuration and quotation, including the correct voltage, rope length and control package for the installation.

BL170 frequently asked questions

QWhat is the BL170 rated to lift?

The standard BL170 is rated at 500 kg on a 17 m rope and has a net weight of 17 kg. It is a material-handling winch, not a personnel hoist.

QCan the BL170 run on 110 V?

Yes. We offer the BL170 in both 110 V and 220 V single-phase versions, so the same machine family covers North American and European/Asian site standards.

QWhat happens in a power failure?

The mechanical ratchet and resistive short-circuit braking hold the drum immediately. The limit switch also protects against over-travel and reverse rope travel during normal operation.

QDoes the winch come with both wired and wireless remotes?

The standard BL170 includes wired and wireless remote control. We can also quote a wired-only version for sites with radio-control restrictions.

QIs the BL170 available as an OEM product?

Yes. We manufacture the BL170 under OEM agreements for distributors and equipment brands, with marking, packaging, manuals and target quantities arranged before production.